產品描述

GYTA53/GYTS53 光纜的結構是將單?；蚨嗄９饫w套入由高模量的聚酯材料做成的松套管中，套管內填充防水化合物。纜芯的中心是一根金屬加強芯，對于某些芯數的光纜來說，金屬加強芯外還需擠上一層聚乙烯 (PE) 。松套管 ( 和填充繩 ) 圍繞中心加強芯絞合成緊湊的圓形纜芯，纜芯內的縫隙充以阻水填充物。涂塑鋁帶 (APL) 縱包后擠一層聚乙烯內護套，雙面鍵鉻涂塑鋼帶 (PSP )縱包后擠制聚乙烯外套成纜。
GYTA53/GYTS53 cable structure is the single mode or multimode fiber into the loose tube made of high modulus
polyester material, the casing filled with waterproof compound. The core of the cable core is a metal core, for some
of the core number of optical cable, the metal to strengthen the core need to squeeze a layer of polyethylene (PE).
Loose tube (and filled rope) around the center to strengthen the core of the core to strengthen the synthesis of com-
pact circular core cable, the core of the gap filled with water to fill the water filled. The coated aluminum with a a
(APL) is longitudinally covered squeeze a layer of polyethylene sheath, double chrome coated strip (PSP) is longitu-
dinally covered after extrusion of polyethylene jacket cable.

產品特點
控制的光纖余長**了光纜具有良好的抗拉性能和溫度特性松套管材料本身具有良好的耐水解性能和較高的強度管內充以特種油膏,對光纖提供了關鍵性保護良好的抗側壓性和柔軟性采用下列
措施來確保光纜的防水性能：
單根鋼絲中心加強芯。
松套管內填充特種防水化合物。
纜芯填充。
涂塑鋁帶 (APL) 防潮層。
Precise control of fiber excess length to ensure the cable has good tensile properties and temperature characteris-
tics of loose tube material itself has good resistance to hydrolysis resistance and high strength tube filled with spe-
cial cream, the fiber provides critical protection good lateral pressure resistance and softness of the measures to
ensure the cable waterproof performance:
a single wire center strengthening core.
Special waterproof compound filled with loose tube.
Full cable core filling.
coated aluminium (APL) moistureproof layer.